Shop

  • DTH BIT QL50 152 CC TPD 3 PORTS VALVED

    $595.00 Excl. GST
    Valved drill bits are a type of down-the-hole (DTH) drill bit used for drilling blast holes in mining and quarrying operations. They are designed to work with DTH hammers and are typically used to drill holes in hard rock formations.

    Benefits

    Valved drill bits are equipped with valves that help to control the flow of air and cuttings through the bit. This helps to improve the drilling efficiency and reduces the amount of wear and tear on the bit.
    • Improved drilling efficiency: The valves help to control the flow of air and cuttings, which improves the drilling efficiency and reduces the amount of time it takes to drill a hole.
    • Reduced wear and tear: The valves also help to protect the bit from wear and tear, which extends the life of the bit.
    • Increased safety: Valved drill bits are designed to be more stable than other types of DTH drill bits, which can help to reduce the risk of accidents.

    Applications

    • Drilling blast holes for blasting operations: Valved drill bits are commonly used to drill blast holes for blasting operations in mining.
    • Drilling exploratory holes for mineral exploration: Valved drill bits can also be used to drill exploratory holes for mineral exploration.
    • Drilling holes for water wells and geothermal wells: Valved drill bits can be used to drill holes for water wells and geothermal wells.
    Please Note: Images are indicative only.
    ENQUIRE ABOUT THIS PRODUCT Details

  • DTH FLAT FACE DRILL BIT QL50 152

    $595.00 Excl. GST
    Flat faced drill bits are a type of down-the-hole (DTH) drill bit used for drilling blast holes in mining and quarrying operations. They are designed to work with DTH hammers and are typically used to drill holes in hard rock formations.

    Applications

    • Drilling blast holes for blasting operations: Flat faced drill bits are commonly used to drill blast holes for blasting operations in mining.
    • Drilling exploratory holes for mineral exploration: Flat faced drill bits can also be used to drill exploratory holes for mineral exploration.
    • Drilling holes for water wells and geothermal wells: Flat faced drill bits can be used to drill holes for water wells and geothermal wells.
    Please Note: Images are indicative only.
    ENQUIRE ABOUT THIS PRODUCT Details

  • DTH FF BIT QL50 165

    $630.00 Excl. GST
    Flat faced drill bits are a type of down-the-hole (DTH) drill bit used for drilling blast holes in mining and quarrying operations. They are designed to work with DTH hammers and are typically used to drill holes in hard rock formations.

    Applications

    • Drilling blast holes for blasting operations: Flat faced drill bits are commonly used to drill blast holes for blasting operations in mining.
    • Drilling exploratory holes for mineral exploration: Flat faced drill bits can also be used to drill exploratory holes for mineral exploration.
    • Drilling holes for water wells and geothermal wells: Flat faced drill bits can be used to drill holes for water wells and geothermal wells.
    Please Note: Images are indicative only.
    ENQUIRE ABOUT THIS PRODUCT Details

  • DTH CONCAVE DRILL BIT – QL60 171MM 6-3/4″

    $645.00 Excl. GST
    Concave drill bits are a type of down-the-hole (DTH) drill bit used for drilling blast holes in mining and quarrying operations. They are designed to work with DTH hammers and are typically used to drill holes in hard rock formations.

    Applications

    • Drilling blast holes for blasting operations: Concave drill bits are commonly used to drill blast holes for blasting operations in mining.
    • Drilling exploratory holes for mineral exploration: Concave faced drill bits can also be used to drill exploratory holes for mineral exploration.
    • Drilling holes for water wells and geothermal wells: Concave faced drill bits can be used to drill holes for water wells and geothermal wells.
    Please Note: Images are indicative only.
    ENQUIRE ABOUT THIS PRODUCT Details

  • RC BIT – RE543/542 124DC 4 SLOT

    $650.00 Excl. GST

    Applications of RC Drilling

    RC drilling is a versatile drilling method that is used for a variety of applications, including:

    Exploration drilling

    RC drilling is a fast and efficient way to collect rock samples for mineral exploration. The cuttings are blown up the drill pipe, so there is no need to pull the rods out of the hole as often as with other drilling methods. This makes RC drilling a good choice for deep exploration drilling.

    Grade control drilling

    RC drilling is also used for grade control drilling, which is used to determine the grade of ore in a deposit. This information is important for planning mining operations.

    Blast hole drilling

    RC drilling can also be used for blast hole drilling, which is the process of drilling holes in rock that will be blasted to break up the rock for mining.

    Water well drilling and geothermal well drilling

    RC drilling can also be used for water well drilling and geothermal well drilling.Please Note: Images are indicative only.
    ENQUIRE ABOUT THIS PRODUCT Details

  • RC BIT – RE545-133DC

    $700.00 Excl. GST

    Applications of RC Drilling

    RC drilling is a versatile drilling method that is used for a variety of applications, including:

    Exploration drilling

    RC drilling is a fast and efficient way to collect rock samples for mineral exploration. The cuttings are blown up the drill pipe, so there is no need to pull the rods out of the hole as often as with other drilling methods. This makes RC drilling a good choice for deep exploration drilling.

    Grade control drilling

    RC drilling is also used for grade control drilling, which is used to determine the grade of ore in a deposit. This information is important for planning mining operations.

    Blast hole drilling

    RC drilling can also be used for blast hole drilling, which is the process of drilling holes in rock that will be blasted to break up the rock for mining.

    Water well drilling and geothermal well drilling

    RC drilling can also be used for water well drilling and geothermal well drilling.
    ENQUIRE ABOUT THIS PRODUCT Details

  • RC BIT – RE545-136DC

    $700.00 Excl. GST

    Applications of RC Drilling

    RC drilling is a versatile drilling method that is used for a variety of applications, including:

    Exploration drilling

    RC drilling is a fast and efficient way to collect rock samples for mineral exploration. The cuttings are blown up the drill pipe, so there is no need to pull the rods out of the hole as often as with other drilling methods. This makes RC drilling a good choice for deep exploration drilling.

    Grade control drilling

    RC drilling is also used for grade control drilling, which is used to determine the grade of ore in a deposit. This information is important for planning mining operations.

    Blast hole drilling

    RC drilling can also be used for blast hole drilling, which is the process of drilling holes in rock that will be blasted to break up the rock for mining.

    Water well drilling and geothermal well drilling

    RC drilling can also be used for water well drilling and geothermal well drilling.Please Note: Images are indicative only.
    ENQUIRE ABOUT THIS PRODUCT Details

  • RC BIT – RE545 140DC

    $725.00 Excl. GST

    Applications of RC Drilling

    RC drilling is a versatile drilling method that is used for a variety of applications, including:

    Exploration drilling

    RC drilling is a fast and efficient way to collect rock samples for mineral exploration. The cuttings are blown up the drill pipe, so there is no need to pull the rods out of the hole as often as with other drilling methods. This makes RC drilling a good choice for deep exploration drilling.

    Grade control drilling

    RC drilling is also used for grade control drilling, which is used to determine the grade of ore in a deposit. This information is important for planning mining operations.

    Blast hole drilling

    RC drilling can also be used for blast hole drilling, which is the process of drilling holes in rock that will be blasted to break up the rock for mining.

    Water well drilling and geothermal well drilling

    RC drilling can also be used for water well drilling and geothermal well drilling.Please Note: Images are indicative only.
    ENQUIRE ABOUT THIS PRODUCT Details

  • DTH CC BIT – QL60 178MM 7″

    $770.00 Excl. GST
    Concave drill bits are a type of down-the-hole (DTH) drill bit used for drilling blast holes in mining and quarrying operations. They are designed to work with DTH hammers and are typically used to drill holes in hard rock formations.

    Applications

    • Drilling blast holes for blasting operations: Concave drill bits are commonly used to drill blast holes for blasting operations in mining.
    • Drilling exploratory holes for mineral exploration: Concave faced drill bits can also be used to drill exploratory holes for mineral exploration.
    • Drilling holes for water wells and geothermal wells: Concave faced drill bits can be used to drill holes for water wells and geothermal wells.
    Please Note: Images are indicative only.
    ENQUIRE ABOUT THIS PRODUCT Details

  • RC SHROUDS – BOX OF 5 – BD545 133/131

    $875.00 Excl. GST
    BD545 Retention Shrouds are used in mining to secure drill bits and rods to the drill string. They are typically made of steel or aluminum and are designed to fit snugly around the drill bit or rod. The shroud has a number of teeth or serrations that grip the drill bit or rod and prevent it from rotating or coming loose.BD545 Retention Shrouds are an important safety feature in mining, as they help to prevent drill bits and rods from becoming dislodged and causing injury or damage. They are also used to improve the efficiency of drilling operations by reducing downtime caused by drill bit or rod failure.
    ENQUIRE ABOUT THIS PRODUCT Details

  • RC SHROUDS – BOX OF 5 -BD545 136/134

    $900.00 Excl. GST
    BD545 Retention Shrouds are used in mining to secure drill bits and rods to the drill string. They are typically made of steel or aluminum and are designed to fit snugly around the drill bit or rod. The shroud has a number of teeth or serrations that grip the drill bit or rod and prevent it from rotating or coming loose.BD545 Retention Shrouds are an important safety feature in mining, as they help to prevent drill bits and rods from becoming dislodged and causing injury or damage. They are also used to improve the efficiency of drilling operations by reducing downtime caused by drill bit or rod failure.
    ENQUIRE ABOUT THIS PRODUCT Details

  • DTH CC BIT – QL60 191MM 7-1/2″

    $1,120.00 Excl. GST
    Concave drill bits are a type of down-the-hole (DTH) drill bit used for drilling blast holes in mining and quarrying operations. They are designed to work with DTH hammers and are typically used to drill holes in hard rock formations.

    Applications

    • Drilling blast holes for blasting operations: Concave drill bits are commonly used to drill blast holes for blasting operations in mining.
    • Drilling exploratory holes for mineral exploration: Concave faced drill bits can also be used to drill exploratory holes for mineral exploration.
    • Drilling holes for water wells and geothermal wells: Concave faced drill bits can be used to drill holes for water wells and geothermal wells.
    Please Note: Images are indicative only.
    ENQUIRE ABOUT THIS PRODUCT Details
Go to Top